Támogatás

AE-10 System Program Ver.2.00


How to know the version
Before you start, check the system program version of your AE-10.

  1. Turn on the power.
  2. Press the [MENU] button to display the menu screen.
  3. Operate the left and right buttons under the [MENU] button to select "Version."
    The current version is shown on the display.
    * Don't perform the update if the product is already up-to-date.
  4. Press the [TONE] button to return to the tone selection screen.


Update history
[ Ver.2.00 ] DEC 2016
Added Tones
A total of 15 new tones have been added.
Please refer to the "Aerophone AE-10 Tone List" in the [ Owner's Manuals ] page for detailed information.

Additional Functions
The functions described below have been added.
Please refer to the "AE-10 Errata and Added Functions on Ver.2.00" in the [ Owner's Manuals ] page for detailed information.
* The symbols in the table indicate the following setting items.
star mark: Tone Setting
S mark: System Setting
  • Tone volume level
  • Vibrato sensitivity
  • Amount of vibrato pitch change
  • Enable/disable user tone shortcuts
  • Key delay function
  • Flageolet sax fingering on/off
  • MIDI Control Change message output setting for breath sensor
  • MIDI Control Change message output setting for bite sensor
  • Backup function for user tones and system settings
  • Restore function for user tones and system settings
  • Delete function for user tones

Quick Start Video " Vibrato "
Quick Start Video " Automatic Vibrato Function "
Quick Start Video " Using the Aerophone to Play a Software Synthesizer "

Functionality Improvements
  • Operation of the breath and bite sensors was improved.
  • A setting value for breath sensitivity was added.

Bug Fixes
The following bugs were fixed.
  • The problem of values not being applied when switching Transpose or Octave Shift was corrected.


What you will need to update your AE-10
  • AE-10
  • AC adaptor
  • USB cable
  • A computer with a USB connector ( Windows, Mac )


Caution when performing the update
  • Never apply this update data to any product other than the AE-10. This update data may destroy the data or system program of other products.
  • Never power-off your AE-10 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the AE-10 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file
Please open/extract the downloaded "ae10_sys_v200.zip" file on your computer to get the update file in the "ae10_sys_v200" folder.

Procedure for the update
Caution
  • Performing an update initializes all setting values made using system settings. Refer to the Owner's Manual and make a written note of the settings.
  • You must not rename the extracted file.
  • When performing an update, be sure to connect the AC adaptor included with the AE-10.
  • Never turn off the AE-10's power while the update is in progress. Otherwise the system program or the AE-10 itself may be destroyed.

Please install the extracted system program file into your AE-10 according to the following procedure.

Step 1: Update the Aerophone AE-10 to Version 2.00
  1. Connect the computer to the AE-10's USB port by a USB cable.
  2. Hold down the octave key [-2] button and turn on the power.
    On the display, the message "Updater" appears, after which the message "Waiting." appears.
  3. Open the "AE-10" drive folder in your personal computer.
  4. Copy ae10_up.bin in the "ae10_sys_v200" folder into the "AE-10" drive by dragging and dropping it.
    * Do not copy the "ae10_sys_v200" folder.
  5. After copying the file is completed, remove the USB drive from the personal computer.
    With Windows
    Right-click on the "AE-10" icon in My Computer and execute "Eject."
    With Mac
    Drag the "AE-10" icon to the Trash icon in the Dock.
  6. Disconnect the USB cable.
    The update starts automatically. The update takes approximately 1 minute.
    * Never switch off the power while the update is in progress.
    When Finished is shown, the update has finished.
  7. Turn the AE-10 power off.
  8. Refer to "How to know the version" and confirm that the version has been updated to show "Ver.2.00."

Step 2: Return Settings to Their Factory-default Values (Factory Reset)
Important : Carry out the factory reset (FctReset) only after first confirming that the version has been updated to show "Ver.2.00." Executing a factory reset while the system is at version 1.** causes all user tone settings to be initialized.
* In Ver.2.00 and later, the factory reset operation (FctReset) only resets the system settings, and does not clear the user tones.

  1. Turn on the power.
  2. Press the [MENU] button to display the menu screen.
  3. Operate the left and right buttons under the [MENU] button to select "FctReset."
  4. To execute the factory reset, press the right-arrow (Y) button.
    When the message "END" appears on the display, the factory reset is complete.
  5. Press the [TONE] button to return to the tone selection screen.


Támogatás

Gyors elérés